Beskrivelse
Stop using taped tennis balls on your freediving rope and start using the high-tech Molchanovs Lanyard Safety Stopper. With premium materials, no tools required, and incredibly easy installation, you’ll never look at lanyard stoppers the same way again.
No tools required
No hex keys or screwdrivers here – all you need is your hands.
Easy installation
No need to pull the Lanyard Safety Stopper through the entire rope! Just place it directly over your rope’s knot, screw on the cap, and secure the O-ring. That’s it.
High-tech materials
High-tech PET plastic means no more worrying about bumps into rocks or overexposure to sunlight and salt water.
Details and Materials
- Ideal for 8 – 12mm ropes
- If using a 14mm rope, you will need to apply more force to close the Lanyard Safety Stopper due to the thickness of the knot
- Easy assembly with no tools required
- Comes with a spare O-ring
Technical Specifications
- Material: High-tech PET plastic
- Diameter: 75mm (3in)
- Weight: 75g (2.6oz)
- Color: White
Care Instructions
All equipment should be rinsed in fresh water after use and placed out of direct sunlight and heat. See the full list of care instructions here.
All equipment should be rinsed in fresh water after use and placed out of direct sunlight and heat. See the full list of care instructions here.
Tie a knot into the freediving rope at approximately 1.5m (3ft) away from the bottom weight.
- Place the stopper over the knot.
- Tighten the cap onto the stopper.
- Place the protective O-ring around the cap.
- To remove, place your finger inside of the notch at the cap and pull.
